en:x300:dust_extraction_key
This is an old revision of the document!
Vacuum cleaner for dust extraction
The Cyborg X-300 should always be used with a dust extractor
The X-300 controller can switch a vacuum cleaner on and off automatically at the beginning and at the end of an engraving job.
To do so there is a dedicated 24 VDC outlet at the rear of the machine. In fact there are 2 identical outlets.
The lower one is meant to connect the vacuum cleaner.
If this icon is shown on the virtual pendent, the vacuum cleaner outlet will be powered.
en/x300/dust_extraction_key.1664047015.txt.gz · Last modified: 2022/09/24 21:16 by erik.ketele
