cyborg-engravers

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== 3.4.2.2. Entering engraving depths in Symmetry and using those while engraving =====

In Symmetry it is possible to enter the desired engraving depths. This happens in the following window (menu "Options - Pass Depths").\\
The numbers in the different fields function as an example:\\
When engraving the job the cutter will first perform a roughing pass at 0.4 mm depth, and after that a cleaning pas at 0.5 mm depth.

{{:en:x200:pasdepths_en.png?500}}

__There is one important condition:__\\
The Cyborg pendent software has to be set in such a way that the machine reads and executes the depths in the cnc-file.\\
In the CNC-field "Z-move values" the option "From Job File" has to be active. (see image below)

{{:nl:x300:z_move_values_from_job_file.png?700}}

**Continue to [[:en:x200:how_to_lock_the_spring_pressure|3.4.2.3. Locking the spring pressure ring to engrave without nosecone]].** \\
**Continue to [[:en:x200:table_of_contents|the table of contents]].**

cyborg-engravers

User Tools

Site Tools

Page Tools