Differences

This shows you the differences between two versions of the page.

--- en:x300:increase_cut_speed_key [2022/09/25 10:49]
erik.ketele
+++ en:x300:increase_cut_speed_key [2025/03/11 21:36] (current)
erik.ketele
@@ Line 1: / Line 1: @@
 ====== Increase cut speed ======
-{{:en:x300:key_feedincrease.png?50|}}\\
+{{:en:x300:key_feedincrease.png?50}}\\
-This input allows you to increase the machine’s XY travel and cut speeds to a maximum of 150%. This affects the feedrate or cut speed when the cutter is moving through the material. When the machine is executing a rapid move, moving above the material, the feedrate override has no effect. The cut speed will be displayed on the Keypad Control Panel as a percentage "%Feed" and as a real speed in “mm/s (XY)”. The feedrate override will determine the amount that the cut speed will be adjusted by.
+This input allows you to increase the machine’s XY travel and cut speeds to a maximum of 150%.\\
+This affects the feedrate or cut speed when the cutter is moving through the material. When the machine is executing a rapid move, moving above the material,\\
+the feedrate override has no effect. The cut speed will be displayed on the Keypad Control Panel as a percentage "%Feed" and as a real speed in “mm/s (XY)”.\\
+The feedrate override will determine the amount that the cut speed will be adjusted by.
-When a file is being executed on the machine pressing the INCREASE CUT SPEED {{:en:x300:key_feedincrease.png?30|}} hot key will increase the feedrate in 1% increments.
+When a file is being executed on the machine pressing the INCREASE CUT SPEED {{:en:x300:key_feedincrease.png?30}}hot key will increase the feedrate in 1% increments.
+Holding the INCREASE CUT SPEED {{:en:x300:key_feedincrease.png?30}}hot key increases the feedrate at an increasingly faster rate.\\
+\\
+**Return to [[:en:x300:keypad_overview|the keypad overview]].** \\
+**Continue to [[:en:x300:table_of_contents|the table of contents]].**
-Holding the INCREASE CUT SPEED {{:en:x300:key_feedincrease.png?30|}} hot key increases the feedrate at an increasingly faster rate.

cyborg-engravers

User Tools

Site Tools

Differences

Page Tools