cyborg-engravers

User Tools

Site Tools

Trace: • option_fixed_arc
en:x300:adjusting_feeds_and_speeds

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
en:x300:adjusting_feeds_and_speeds [2022/09/21 21:57]
erik.ketele 		en:x300:adjusting_feeds_and_speeds [2023/10/20 10:17] (current)
jan.vangelder
Line 1: Line 1:
 ====== Adjusting feeds and speeds during cutting ====== ====== Adjusting feeds and speeds during cutting ======
 +
 +----
  
 Depending upon your engraving or routing software, feeds (mm/sec or m/min) and speeds (rpm) can or cannot be entered. If the resulting cnc files do not contain feeds and speeds, the system will use the speed and feed parameters which have been predefined in the virtual pendent's "preferences" menu option, accessible by right clicking the "?" in the virtual pendent's top bar. If the engraving job contains feeds and/or speeds, they will overrule the values in this dialog window. Depending upon your engraving or routing software, feeds (mm/sec or m/min) and speeds (rpm) can or cannot be entered. If the resulting cnc files do not contain feeds and speeds, the system will use the speed and feed parameters which have been predefined in the virtual pendent's "preferences" menu option, accessible by right clicking the "?" in the virtual pendent's top bar. If the engraving job contains feeds and/or speeds, they will overrule the values in this dialog window.
Line 11: Line 13:
 While engraving, it is also possible to modify the feed on the fly. The feed is also limited between a minimum and a maximum speed, the minimum speed being 1% of the preprogrammed moving speed in the job, the maximum speed 150% of the preprogrammed moving speed in the job. It is not possible to increase the feed higher than 1.5 times the preprogrammed speed. The chosen percentage is applied to both the XY and the Z speeds. While engraving, it is also possible to modify the feed on the fly. The feed is also limited between a minimum and a maximum speed, the minimum speed being 1% of the preprogrammed moving speed in the job, the maximum speed 150% of the preprogrammed moving speed in the job. It is not possible to increase the feed higher than 1.5 times the preprogrammed speed. The chosen percentage is applied to both the XY and the Z speeds.
  
-To increase the feed, click the [[:user:jan.vangelder:x300:en:20x20.png?id=en%3Ax300%3Aadjusting_feeds_and_speeds&media=user:jan.vangelder:x300:en:20x20.png|{{:user:jan.vangelder:x300:en:20x20.png?18}}]] button on your virtual keypad. To decrease the feed, click the [[:user:jan.vangelder:x300:en:20x20.png?id=en%3Ax300%3Aadjusting_feeds_and_speeds&media=user:jan.vangelder:x300:en:20x20.png|{{:user:jan.vangelder:x300:en:20x20.png?18}}]] button on your virtual keypad.+To increase the feed, click the {{:en:x300:key_feedincrease.png?30|}} key on your virtual keypad. To decrease the feed, click the {{:en:x300:key_feeddecrease.png?30|}} key on your virtual keypad.
  
 |**Example:** \\  \\ If a job contains the following speeds: 50 mm/sec for XY moves and 25 mm/sec for Z moves, \\ the following feed percentages will result in the following feeds:  ||| |**Example:** \\  \\ If a job contains the following speeds: 50 mm/sec for XY moves and 25 mm/sec for Z moves, \\ the following feed percentages will result in the following feeds:  |||
Line 21: Line 23:
 |  150%|  75 mm/sec|  37.5 mm/sec| |  150%|  75 mm/sec|  37.5 mm/sec|
  
 +**Continue to [[pause_button|the pause key]].**\\
 **Continue to [[:en:x300:table_of_contents|the table of contents]].** **Continue to [[:en:x300:table_of_contents|the table of contents]].**
  
  
en/x300/adjusting_feeds_and_speeds.1663790243.txt.gz · Last modified: 2022/09/21 21:57 by erik.ketele

Page Tools

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki