Differences

This shows you the differences between two versions of the page.

--- en:x200:executing_a_job_without_nosecone [2025/04/23 22:04]
erik.ketele
+++ en:x200:executing_a_job_without_nosecone [2025/04/23 22:08] (current)
erik.ketele
@@ Line 1: / Line 1: @@
 ===== 3.4.2.4. Executing a job without using a nosecone =====
-To be able to engrave without a nosecone it is very important that the engraving table underneath the plate to be engraved is completely flat. \\ the standard table of the X200 might be flat enough for some applications, but if you need very accurate and equal depths all over the surface of the table, you will need to prepare the engraving table for that. \\ The best way to achieve this is applying a piece of phenolic material to the engraving table and to flatten this with the engraving spindle. \\ After having done that the table surface will be flat enough to obtain equal engraving depths all over the surface of the engraving table. \\ \\
+To be able to engrave without a nosecone it is very important that the engraving table underneath the plate to be engraved is completely flat. \\ the standard table of the X200 might be flat enough for some applications, but if you need very accurate and equal depths all over the surface of the table, you will need to prepare the engraving table for that. \\ The best way to achieve this is by applying a piece of phenolic or acrylic material to the engraving table and to flatten this with the engraving spindle. \\ After having done that the table surface will be flat enough to obtain equal engraving depths all over the surface of the engraving table. \\ Don't forget to (temporarily) take away the left and the rear table stops before starting your table mill job. \\
 |Nr.|Description|Image||

cyborg-engravers

User Tools

Site Tools

Differences

Page Tools